ESCORT Radar 9500i 8500 X50 HIDDEN MIRROR Direct Cord 

Get the best products from safe-n-sound1. Hidden mirror direct hard wire cord with built-in. Be safe with safe-n-sound1 products that come with a low amp fuse, guaranteed to protect your equipment.

New with detailed instructions and wire ties so you can install very easily. Direct hidden mirror power cord has a built-in. To protect your radar detector. Free up your cigarette lighter outlet! Install a fused hidden mirror direct hard wire power cord today.

How to install a hidden mirror cord. Punishable to the fullest extent by law.

Tired of dangling power cords? Our direct cords eliminate the bulky dangling power cords that hang over your dashboard and over your rearview mirror. Our instructions are very detailed and installation is very simple. Some newer vehicles have a powered rear view mirror which allows you to install our. Hidden mirror cord to the rear view mirror and hide the wire for a cleaner, more professional look.
Just mount your radar detector close to the rear view mirror and install the cord. It’s very easy to install and it’s virtually hidden away. Check out more of safe-n-sound1 products in the store.

The fused hidden mirror direct wire cord is an optional accessory that allows you to connect your radar detector directly to your rear view mirror. (leaving your lighter socket free for other uses). The fused hidden mirror direct wire cord is approximately. In the middle to protect your investment.

Now you can wire directly to your rear view mirror and eliminate dangling power cords. Our kits easily allows you to hard wire your detector to your rear view mirror and hide the wire for a cleaner, more professional look. This kit can be removed and installed in a different car if you ever change your vehicle. Helpful hints for installing one of our. Of how the leads on your mirror cord will come in the package.

If you stalling into a into your car’s rear view mirror plug and the. Leads do not have a good connection, you might get a better. Outcome if you slightly bend the leads. View mirror power plug has big slots, you might have an tter connection if you fully bend the leads to fit into the. Power plug slots of your car’s rear view mirror.

Both cords normally come in 12inch lengths, but customized to any length you wish. This is a comparison of shot of our stealth mirror cord on the left and our. Hidden mirror cord on the right.

This kit will work on the below detectors that uses the “modular” type power plug. X50 blue or red, passport 8500, passport 7500, passport 6800. Did you know you can add a mute button or the one or two led option to your mirror cords? New hidden mirror direct cord with built-in fuse. Detailed instructions to make your installation very easy. Wire tie to make your installation neat.

You might also be interested in. New direct cord w/ fuse. New direct cord w/ fuse and flat mute button. New direct cord w/ fuse and round mute button. Need to customize a cord?

We will help you install your new direct cord. Specialize in direct cords and have an excellent feedback history. We strive to make your experience with us as smooth and pleasant as possible. That’s why we give 110% with our customer service. And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend. Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list.

Do not copy without permission.

Escort Passport 9500ix Redline Solo S3 Power Wire Cord Get the best products from safe-n-sound1. New with structions, wire tie to make your installation neat. Need help installing these high quality cords.

Free up your cigarette lighter outlet! Direct hard wire power cord today. Our direct cords eliminate the bulky dangling power cords that. Hang over your dashboard and over your rearview mirror.

Very detailed and installation is very simple. Missing a power cord for your radar. The direct wire cord is an optional.

Accessory that allows you to connect the radar detector directly to your fuse. Block or other 12-volt source. (leaving your lighter socket free for other uses). The direct wire cord is approximately. With a t - tap.

To connect to a power wire source like below. If you need a fuse tap, just let us know which one you. Would like and we’ll replace the t-tap in your order. To connect to a blade fuse. In the fuse box, or a. To connect to a mini blade. Fuse in the fuse box.

Wire directly to your fuse box or power wire source and eliminate dangling power. Our power cords will allow your. Radar detector to be hard wired to your vehicle very easily. Change vehicles, simply unplug the red wire from the t-tap connector or fuse. Tap, and unhook the black ground wire.

This kit will work on the below detectors that uses the “modular” type power plug. X50 blue or red, passport 8500, passport 7500, passport 6800. Structions to make your installation a breeze. To connect to a power wire source.
To connect to fuse in the fuse box very easily. Make sure you get a 1 year limited. You might also be interested in.

New hidden mirror direct cord w/ fuse. New direct cord w/ fuse and flat mute button. New direct cord w/ fuse and round mute button. Need to customize a cord? And see what our customers had to say.

Very satisfied installed in 20 minutes quality product highly recommend. Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list. Do not copy without permission.


BEL BELTRONICS RADAR CORD SMART MUTE Pro RX65 STi 995 Get the best direct cords here. Direct hard wire cord with round or flat mute button kit. Direct cord with mute button for your radar detector. No one else has these, be the first! Direct hard wire power cord comes with a built-in. Free up your cigarette lighter outlet! Install a fused direct hard wire power cord today. Button accessory is a unique power cord with a convenient. Button right within arms reach! Tired of dangling power cords? Our direct cords eliminate the bulky dangling power cords that hang over your dashboard and over your rearview mirror. What is a direct cord.

With round or flat mute button? The direct wire cord is an optional accessory that allows you to connect your radar detector directly to your fuse block or other 12-volt source. (leaving your lighter socket free for other uses).

And provides a mute button for the detector. The direct wire cord is approximately. And comes with a built-in.

To protect your radar detector. Be safe with safe-n-sound1 products that come with a low amp fuse, guaranteed to protect your equipment. It’s the perfect addition for any car when reaching the detector’s mute button on the windshield is a stretch. Normally comes with a t - tap. To connect to a power wire source like below.

Just wrap the t-tap onto the wire and pinch. With a pair of pliers, then you just connect the red wire to the t-tap. To connect to a blade fuse.
To connect to a mini blade fuse. Here is a comparison of the. Blade fuse on the left and the mini blade fuse on the right.

Now you can wire directly to your fuse box. And eliminate dangling power cords. Our power cords will allow your radar detector to be hard wired to your vehicle very easily. If you do change vehicles, simply unplug the red wire from the t-tap connector or the fuse tap, and unhook the black ground wire. This kit will work on the below detectors that uses the “modular” type power plug. Pro rx 65, pro rx 55. Vector 995, vector 965, vector 955, vector 940, vector 895 & vector 795. The cord for the mute button is about 4 feet long. Where you would like to mount your mute button. Button needs a hole that is approximately 1/4 or 6.5mm to mount. Try to test drill a hole onto an extra piece of plastic or wood not needed to make sure the hole is sufficient. Sure the chosen mounting location is either 1/8 or 2.5mm thickness or. Round mute button will not screw into a hole if the. Mounting surface is any thicker. The nut from the round mute button. Place the round mute button. Through the hole from behind with the lock washer on it or after the. The lock washer is the round washer with the it, it is slightly curved up from each end. The lock needed so the nut will not loosen from vibration.
Round mute button with one hand and hand tighten the nut onto the. Round mute button on the front side of the mounting hole.

Finally tighten with a pair of needle nose pliers just until the lock. Button has strong mounting tape on the back side of it. On a smooth surface would be ideal. The surface with rubbing alcohol or some sort of cleaning agent.

Let the surface dry, peel the backing off of the mounting tap and. Apply pressure for a few seconds so the mounting tape will adhere. New direct cord with built-in fuse and mute button. (let us know if you would like the round or flat mute button). Detailed instructions to make your installation very easy.

Wire ties to make your installation neat. You could also add (1) one l. Turns on when your radar. Detector is on, turns off when your radar detector is off and blinks when in alert mode.

Comes on a four foot cord so you can place it almost anywhere. Order with the mute button cord and we will install it on the cord for. You could also add (2) two l. Detector is on, turns off when your radar detector is off. Flashes when in alert mode.

Comes on a four foot cord for each l. So you can place it almost anywhere.

To let us know that you would like the l. And see what our customers had to say.

Very satisfied installed in 20 minutes quality product highly recommend. Great contact with my questions. Check out our other items for more great deals.

Be sure to add us to your favorites list. Do not copy without permission.

Wrap t- tap onto wire and squeeze with. Insert connector onto the t-tap for power. Safe-n-sound1 is the original owner and only inventor of the. Remote direct smart wire cord. Punishable to the fullest extent by law.

ESCORT RADAR C65, 9500i, 9500ix DIRECT POWER WIRE CORD Get the best products from safe-n-sound1. Our direct cords eliminate the bulky dangling.

Power cords that hang over your dashboard and over your rearview mirror. Our instructions are very detailed and installation is very simple. Check out our other items in our store for great deals. What is a direct cord hard wire kit?

The direct wire cord is an optional accessory that allows you to connect your radar detector directly to your fuse block or other 12-volt. (leaving your lighter socket free for other uses). By installing our direct hard wire power cord you will free up your cigarette lighter outlet or your 12v auxiliary power outlet. The direct wire cord is approximately 8 feet long. And comes complete to hook up your radar detector. Normally comes with a t - tap. To connect to a power wire source like below. Just wrap the t-tap onto the wire and pinch. With a pair of pliers, then you just connect the red wire to the t-tap. To connect to a blade fuse. To connect to a mini blade fuse.

Here is a comparison of the. Blade fuse on the left and the mini blade fuse on the right. Can wire directly to your fuse box and eliminate dangling power cords. Our power cords will allow your radar detector to be hard wired to your vehicle very easily. If you do change vehicles, simply unplug the red wire from the t-tap connector or the fuse tap, and unhook the black ground wire.

This kit will work on the below detectors that uses the “modular” type power plug. X50 blue or red, passport 8500, passport 7500, passport 6800. New direct cord hard wire kit. Detailed instructions to make your installation a breeze. Wire tie to make your installation neat.

You might also be interested in. New hidden mirror direct cord w/ fuse. New direct cord w/ fuse and flat mute button. New direct cord w/ fuse and round mute button.

Need to customize a cord? And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend.

Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list. Do not copy without permission.

Escort Passport 9500ix Radar Detector - Used - Smart Cord Missing This item comes with its original case, manual, quick release window mounts. But is missing the coiled smart cord. I have no way to determine its working condition, so i will allow for a 10 day return if you can not get it working. Product features and technical details.
Provides extreme long-range warning on all radar bands including x, k, superwide ka, and instant-on pop mode, along with 360 degree laser protection. Intelligent radar boasts new gps-enabled features like truelock, autosensitivity, and mark location. Ultra-bright red alphanumeric matrix display with 280 leds and four different modes, including new speedalert mode. Auto volume feature adjusts alert volume according to ambient volume in vehicle.

Clear voice alerts, with feedback for preference settings. With the passport 9500i, escort has revolutionized the radar detector category again.

Its blistering performance is built upon the passport 9500i, which means it delivers the best protection possible against all speed measuring devices. Escort added advanced gps-powered intelligence, which makes the passport 9500i on of the best performing, quietest and most user-friendly radar detector ever designed. A truly intelligent radar detector. Ultra-bright alphanumeric display with 280 leds. Four metering modes, including the new speedalert mode. The 9500i provides extreme long-range warning on all radar bands including x, k, superwide ka, and instant-on pop mode. Multiple front and rear laser sensors provide 360 degree laser protection, including the widest field of view. For the ultimate in laser protection, the passport 9500i is also zr3 ready. This new feature allows you to permanantly “lock out” a signal in a specific location. Once you store a signal, it will be rejected the next time you are in that area. You now have the power ot eliminate false alerts by location and frequency. This new feature allows you to instantly “mark” known speed traps, cameras and other places of interest. Once marked, the 9500i will provide an alert any time you approach the saved locations. New easy to understand voice announcements provide instant audible feedback for controls and alerts. All alerts and instructions can be communicated using a voice announcement, or, if preffered, normal tones may be used.
The new autovolume feature automatically increases the alert volume in noisy conditions. In this setting, the 9500i’s built-in microphone listens to the ambient noise in the vehicle and increases the audio in noisy conditions e. Loud music, excessive wind noise, etc.

The 9500i features an ultra-bright alphanumeric display with 280 leds. The device displays three high-resolution meter modes: standard bar graph display or expertmeter and specdisplay for more advanced users. Expertmeter tracks and displays up to 8 radar signals simultaneously, and specdisplay provides actual numeric frequency for any radar signal. Finally, new for the 9500i is speedalert metering, which displays the driving speed during each alert.

Passport’s autosensitivity mode provides long-range warning, with minimum false alarms. In this mode, passport’s internal computer continuously analyzes all incoming signals and intelligently adjusts the sensitivity circuits. The addition of gps intelligence means it also adjusts according to motion–as your vehicle’s speed increases, the sensitivity range increases. As your speed decreases, so does the sensitivity, further eliminating unwanted and unnecessary alarms. You can also select conventional highway and city modes.


When driving in urban areas where annoying x-band intrusion alarms and door openers are common, city mode can be engaged to lower x-band sensitivity and reduce x-band alerts. The 9500i also offers safety warning systems (sws) detection.

This safety feature warns you of the presence of potential road hazards by detecting signals from safety transmitting devices. Passport 9500i, owner’s manual, quick-release windshield mount, quick reference card, escort travel case. The passport 9500i, has revolutionized the radar detector category again.

Its blistering performance is derived from the “world’s best” passport 8500 x50, which means it delivers the best protection possible against all speed measuring devices. We added advanced gps-powered intelligence, which makes the passport 9500i the best performing, quietest and most user-friendly radar detector ever designed. Additional features include: 360-degree radar and laser detection, blistering all-band protection, variable-speed radar performance, gps-powered truelock filter, mark locations features, speed alert, crystal-clear voice alerts, intelligent volume control, user-selectable preferences, mute, automute & smartmute, completely immune to the vg-2 “detector-detector”, and comes fully equipped.

ESCORT RADAR Direct Cord SMART MUTE 9500i 8500 x50 9500 ESCORT RADAR Direct Cord SMART MUTE 9500i 8500 x50 9500 ESCORT RADAR Direct Cord SMART MUTE 9500i 8500 x50 9500 

Get the best direct cords here. Direct hard wire cord with round or flat mute button kit. Direct cord with mute button for your radar detector. No one else has these, be the first! Direct hard wire power cord comes with a built-in.

Free up your cigarette lighter outlet! Install a fused direct hard wire power cord today. Button accessory is a unique power cord with a convenient. Button right within arms reach! Tired of dangling power cords? Our direct cords eliminate the bulky dangling power cords that hang over your dashboard and over your rearview mirror.

What is a direct cord. With round or flat mute button? The direct wire cord is an optional accessory that allows you to connect your radar detector directly to your fuse block or other 12-volt source. (leaving your lighter socket free for other uses). And provides a mute button for the detector.

The direct wire cord is approximately. And comes with a built-in.

To protect your radar detector. Be safe with safe-n-sound1 products that come with a low amp fuse, guaranteed to protect your equipment. It’s the perfect addition for any car when reaching the detector’s mute button on the windshield is a stretch.

Normally comes with a t - tap. To connect to a power wire source like below. Just wrap the t-tap onto the wire and pinch. With a pair of pliers, then you just connect the red wire to the t-tap. To connect to a blade fuse.

To connect to a mini blade fuse. Here is a comparison of the. Blade fuse on the left and the mini blade fuse on the right. Now you can wire directly to your fuse box.

And eliminate dangling power cords. Our power cords will allow your radar detector to be hard wired to your vehicle very easily. If you do change vehicles, simply unplug the red wire from the t-tap connector or the fuse tap, and unhook the black ground wire.
This kit will work on the below detectors that uses the “modular” type power plug. X50 blue or red, passport 8500, passport 7500, passport 6800. The cord for the mute button is about 4 feet long. Where you would like to mount your mute button. Button needs a hole that is approximately 1/4 or 6.5mm to mount.

Try to test drill a hole onto an extra piece of plastic or wood not needed to make sure the hole is sufficient. Sure the chosen mounting location is either 1/8 or 2.5mm thickness or. Round mute button will not screw into a hole if the. Mounting surface is any thicker. The nut from the round mute button.

Place the round mute button. Through the hole from behind with the lock washer on it or after the. The lock washer is the round washer with the it, it is slightly curved up from each end. The lock needed so the nut will not loosen from vibration.


Round mute button with one hand and hand tighten the nut onto the. Round mute button on the front side of the mounting hole. Finally tighten with a pair of needle nose pliers just until the lock. Button has strong mounting tape on the back side of it.

On a smooth surface would be ideal. The surface with rubbing alcohol or some sort of cleaning agent. Let the surface dry, peel the backing off of the mounting tap and.

Apply pressure for a few seconds so the mounting tape will adhere. New direct cord with built-in fuse and mute button. (let us know if you would like the round or flat mute button). Detailed instructions to make your installation very easy. Wire ties to make your installation neat.

You could also add (1) one l. Turns on when your radar. Detector is on, turns off when your radar detector is off and blinks when in alert mode. Comes on a four foot cord so you can place it almost anywhere.

Order with the mute button cord and we will install it on the cord for. You could also add (2) two l. Detector is on, turns off when your radar detector is off.

Flashes when in alert mode. Comes on a four foot cord for each l. So you can place it almost anywhere.
To let us know that you would like the l. And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend.

Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list. Do not copy without permission.

Wrap t- tap onto wire and squeeze with. Insert connector onto the t-tap for power. Safe-n-sound1 is the original owner and only inventor of the. Remote direct smart wire cord. Punishable to the fullest extent by law.

VALENTINE ONE V1 RADAR HARD WIRE POWER CORD KIT w/ FUSE Get the best products from safe-n-sound1. Make sure your direct hard wire power cord has a built-in. To protect your radar detector. Free up your cigarette lighter outlet!

Direct hard wire power cord today. Tired of dangling power cords? Our direct cords eliminate the bulky dangling power cords that hang over your dashboard and over your rearview mirror.

Our instructions are very detailed and installation is very simple. Check out more of safe-n-sound1 products in the store. What is a direct wire cord with built-in fuse? The direct wire cord is an optional accessory that allows you to connect your radar detector directly to your fuse block or other 12-volt.

(leaving your lighter socket free for other uses). By installing our direct hard wire power cord you will free up your cigarette lighter outlet or your 12v auxiliary power outlet. The direct wire cord is approximately. And comes with a built-in.

Be safe with safe-n-sound1 products that come with a low amp fuse, guaranteed to protect your equipment. Normally comes with a t - tap. To connect to a power wire source like below.

Just wrap the t-tap onto the wire and pinch. With a pair of pliers, then you just connect the red wire to the t-tap. To connect to a blade fuse. To connect to a mini blade fuse. Here is a comparison of the.

Blade fuse on the left and the mini blade fuse on the right. Can wire directly to your fuse box and eliminate dangling power cords. Our power cords will allow your radar detector to be hard wired to your vehicle very easily.


If you do change vehicles, simply unplug the red wire from the t-tap connector or the fuse tap, and unhook the black ground wire. This kit will work on the below detectors that uses the “modular” type power plug. Did you know you can add an attached 4ft cord to power your v1 concealed display? New direct cord kit with built-in. Detailed instructions to make your installation a breeze.

Wire tie to make your installation neat. You might also be interested in. New hidden mirror direct cord w/ fuse.

New direct cord w/ fuse and flat mute button. New direct cord w/ fuse and round mute button. Need to customize a cord?

We will help you install your new direct cord. Specialize in direct cords and have an excellent feedback history.

We strive to make your experience with us as smooth and pleasant as possible. That’s why we give 110% with our customer service. And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend. Great contact with my questions.


Check out our other items for more great deals. Be sure to add us to your favorites list. This listing is copyright protected. Do not copy without permission.

We can now add a 4ft cord to wire up your concealed display all in one single power cord for $6.

VALENTINE ONE 1 V1 RADAR LASER COILED POWER CORD 7 feet Get the best products from safe-n-sound1. Cord for your valentine radar detector. Coiled power cord for your radar detector damage? Coiled cord is similar to the one that was included with. The valentine v 1.7 or v 1.8 radar detector to connect to your cigarette lighter. It has the same connector on both ends. Coiled cord is approximately 1 feet long and stretches to 7 feet. This kit will work on the below detectors that uses the “modular” type power plug. New v1 - 7 feet coiled cord. You might also be interested in. New valentine hidden mirror direct cord w/ fuse. New valentine direct cord w/ flat mute button. New valentine direct cord w/ round mute button. New valentine direct - wire power adapter. Need to customize a cord? We will help you install your new direct cord. Specialize in power cords and have an excellent feedback history. We strive to make your experience with us as smooth and pleasant as possible. That’s why we give 110% with our customer service. And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend.

Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list. Do not copy without permission.

Valentine One V1 Radar Detector as is no power cord Valentine One V1 Radar Detector as is no power cord Valentine One V1 Radar Detector as is no power cord 

Valentine One V1 Radar Detector as is no power cord Valentine One V1 Radar Detector as is no power cord 

Valentine 1 radar detector as is no power cord to see if it works. Was in a storage room cleanout.

ESCORT RADAR DETECTOR C65 STEALTH MIRROR POWER CORD NEW Escort or beltronics cigarette lighter power plug. Great deal to have a spare one or if you are missing one. Now you can directly hard wire your your vehicle’s rearview mirror! High quality hard wire cords with a built-in mute button to place within arms reach! Get the best products from safe-n-sound1. Be safe with safe-n-sound1 products that. Come with a low amp fuse, guaranteed to protect your equipment. Mirror direct hard wire cord with built-in. Stealth mirror power cord has a built-in. To protect your radar detector. How to install a stealth mirror cord.

Punishable to the fullest extent by law. Tired of dangling power cords? Our direct cords eliminate the bulky dangling power cords that hang over your dashboard and over your rearview mirror. Our instructions are very detailed and installation is very simple.
Some newer vehicles have a powered rear view mirror which allows you to install our. Stealth mirror cord to the rear view mirror and hide the wire for a cleaner, more professional look. Just mount your radar detector close to the rear view mirror and install the cord.

It’s very easy to install and it’s. Check out more of safe-n-sound1 products in the store. Stealth mirror direct wire cord is an optional accessory that allows you to connect your radar detector directly to your rear view mirror. (leaving your lighter socket free for other uses). The fused stealth mirror direct wire cord is approximately. Our kits easily allows you to hard wire your detector to your rear view mirror and hide the wire for a cleaner, more professional look. Very similar to the hidden mirror cord, but you don’t have to tuck the remaining. This kit can be removed and installed in a different car if you ever change your vehicle. This kit will work on the below detectors that uses the “modular” type power plug. Passport 8500, passport 7500, passport 6800. Did you know you can add a mute button or the one or two led option to your mirror cords? New stealth mirror direct cord with built-in. Detailed instructions to make your installation very easy. Wire tie to make your installation neat.

And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend. Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list.

Do not copy without permission.