Get the best direct cords here. Direct hard wire cord with round or flat mute button kit. Direct cord with mute button for your radar detector. No one else has these, be the first! Direct hard wire power cord comes with a built-in. Free up your cigarette lighter outlet! Install a fused direct hard wire power cord today. Button accessory is a unique power cord with a convenient. Button right within arms reach! Tired of dangling power cords? Our direct cords eliminate the bulky dangling power cords that hang over your dashboard and over your rearview mirror. What is a direct cord.
To protect your radar detector. Be safe with safe-n-sound1 products that come with a low amp fuse, guaranteed to protect your equipment. It’s the perfect addition for any car when reaching the detector’s mute button on the windshield is a stretch.
With a pair of pliers, then you just connect the red wire to the t-tap. To connect to a blade fuse.
To connect to a mini blade fuse. Here is a comparison of the. Blade fuse on the left and the mini blade fuse on the right. Now you can wire directly to your fuse box. And eliminate dangling power cords. Our power cords will allow your radar detector to be hard wired to your vehicle very easily. If you do change vehicles, simply unplug the red wire from the t-tap connector or the fuse tap, and unhook the black ground wire. This kit will work on the below detectors that uses the “modular” type power plug. Passport 8500, passport 7500, passport 6800.
The cord for the mute button is about 4 feet long. Where you would like to mount your mute button.
Button needs a hole that is approximately 1/4 or 6.5mm to mount. Try to test drill a hole onto an extra piece of plastic or wood not needed to make sure the hole is sufficient. Sure the chosen mounting location is either 1/8 or 2.5mm thickness or.
Place the round mute button. Through the hole from behind with the lock washer on it or after the. The lock washer is the round washer with the it, it is slightly curved up from each end.
The lock needed so the nut will not loosen from vibration. Round mute button with one hand and hand tighten the nut onto the.
Round mute button on the front side of the mounting hole. Finally tighten with a pair of needle nose pliers just until the lock. Button has strong mounting tape on the back side of it. On a smooth surface would be ideal. The surface with rubbing alcohol or some sort of cleaning agent.
Let the surface dry, peel the backing off of the mounting tap and. Apply pressure for a few seconds so the mounting tape will adhere.
New direct cord with built-in fuse and mute button. (let us know if you would like the round or flat mute button). Detailed instructions to make your installation very easy. Wire ties to make your installation neat. You could also add (1) one l. Turns on when your radar. Detector is on, turns off when your radar detector is off and blinks when in alert mode. Comes on a four foot cord so you can place it almost anywhere. Order with the mute button cord and we will install it on the cord for. You could also add (2) two l. Detector is on, turns off when your radar detector is off. Blinks when in alert mode. Comes on a four foot cord for each l. So you can place it almost anywhere. To let us know that you would like the l.
And see what our customers had to say. Very satisfied installed in 20 minutes quality product highly recommend.
Great contact with my questions. Check out our other items for more great deals. Be sure to add us to your favorites list. This listing is copyright protected â©. Do not copy without permission. Safe-n-sound1 is the original owner and only inventor of the. Remote direct smart wire cord. Punishable to the fullest extent by law.
